DeHy B1 Bike Yoke for Reverb Stealth (2017 to 2019)

Be the first to write a review

€49.90

	Serenity Pack	Comfort Pack
Express delivery
Bike assembled 100%⁽¹⁾
Fast-track access to our experts	1 year	3 months
Free marking	~~€19.99~~	~~€19.99~~
Bike maintenance at Alltricks stores	3 "gold" maintenances ⁽²⁾ ~~€285~~	1 "bronze" maintenance ⁽³⁾ ~~€50~~
Additional labor (2h) ⁽²⁾	~~€138~~

(1) Bike fully assembled, checked, and adjusted by our expert mechanics. To reduce the environmental impact of transport, we have removed the front wheel and pedals from your bike. The box used is therefore lighter and less bulky. All you have to do is reassemble them and enjoy your new bike. We recommend adjusting the saddle height, tire pressure, and suspensions according to your preferences.

(2) Within 2 years of bike purchase.

(3) Within 3 months of bike purchase. The services are valid only in one of our Alltricks stores. Details of the available maintenance services can be found at: www.alltricks.fr/surl/l-atelier

Delivered from 05/12

Last one in stock!

€49.90

Sold by Alltricks

Become Premium !

€1.00 cashback for the purchase of this product

For only 9.99€, enjoy 1 year of benefits:

Unlimited free 24-hour express delivery

Cashback discounts on thousands of products

100 days returns policy

Exclusive benefits

More about Alltricks Premium

The Premium subscription is not automatically renewed, no payment is required at the end of the 1 year period.

Description

Our DeHy allows you to improve the ergonomics and reliability of your Reverb, and replace the original, less-than-ergonomic Reverb hydraulic lever with one of our cable-operated levers.

After the DeHy conversion, your Reverb can be operated by one of our remotes, or by another remote if it has enough pull stroke. DeHy needs about 9 mm of travel to reach full power of the Reverb. All of our remotes provide more than enough cable.

The DeHy B1 kit is compatible with Stealth Reverbs from model years 2017 through 2019.
Please note that some B1 Reverbs were already delivered in 2016.
You can recognize a B1 Reverb by the "Rockshox" logo on the top telescoping tube. On older versions, there is no logo at all and on newer C1 versions, there would be a "reverb" logo.

Details

Installation is simple and does not require opening the stand's internal hydraulic system. Simply remove the original hydraulic line from the Reverb and replace it with our low maintenance cable control. A slightly experienced do-it-yourselfer can do the job in less than 10 minutes.
Another advantage of the cable control is the availability of spare parts. If you damage the cable after a fall, you can find a control cable and outer casing to replace for a small fee at almost any bike store. However, very few bike stores have the original hydraulic cable in stock, so you often have to wait several days before you can repair the stand.
In contrast to the original "Connectamajic" quick release, our DeHy control is significantly shorter, which can provide you with valuable extra insertion depth for the stand on some frames.
No need to bleed the original pipe