Imagined and designed in the French Alps, this 3-season 3-person trekking tunnel tent offers ultra-light weight & compactness, minimalist comfort.
With its extremely compact tunnel structure, it offers a minimum & essential habitability: 2 doors, 1 large front apse, 3 pockets Roll-over hoops for quick assembly and assembly
- EASY TRANSPORT: Total weight 2.3 kg Compact & compressible cover 8 L Dimensions 40x17x16 cm
- ACCOMMODATION : Width 60 cm per person Room height 95 cm 2 doors 1 large apse 3 pockets
- WIND RESISTANCE: Wind resistance 70 km / h (Force 8): valid in the wind tunnel on a turntable.
- EASE OF ASSEMBLY / D ASSEMBLY: Quick assembly : room and flysheet pre-mounted. Sleeves for the hoops.
- IMPERM ABILIT: Water column (Schmerber): Flysheet > 2000 mm. Bedroom floor mats> 3000 mm.
- ECO-DESIGN: Anodized arches with reduced environmental impact. Non-anodized sardines.
- R REDUCTION OF HEAT: The flysheet rolls to ventilate. Doors and bedroom with mosquito nets.
- OBSCURIT
WEIGHT
Total weight 2.3 kg
Similar elements to share the portage.
900 g flysheet
Room 700 g
Roll bar kit 450 g
Sardines (11 pieces) 110 g
Covers 60 g + 60 g
Guy lines 24 g
Repair kit (ferrule, patch) 20 g
To preserve your product and strengthen your protection of the ground and the weather, you can complete your Trek 900 UL 3P tent with a ground sheet type survival blanket.
Weights, volumes & dimensions may vary slightly due to production tolerances.
SPACE
Room length 215 cm
Chamber width 180 cm at the head and 140 cm at the feet
Room height 95 cm
The large front apse (storage space between the bedroom and the flysheet), 100 cm deep and 190 cm wide, or almost 2 m, offers ample storage and living space. Sheltered from the weather, this allows you to accommodate 3 backpacks of around 50 70 L, and to store and organize your bivouac stuff.
3 pockets in the bedroom.
ARCHITECTURE, ARCEANS AND SARDINES
Aluminum roll bar light & resistant to breakage and frost: aluminum 7001 T6 Yunan SD70PF 9 mm and 9.5 mm.
Optimized square sardines: "anvil" head, extra body, which makes them very resistant and light (aluminum 7075 T6). Not anodized for limited environmental impact.
The 2 arches form a non-self-supporting tunnel. This structure makes it possible to have a very light tent but which needs to be fixed to the ground and does not stand erected on its own.
ASSEMBLY / D ASSEMBLY
Extremely fast assembly or assembly. The flysheet and bedroom are pre-assembled. It is then necessary to slide the hoops in the sheath of the flysheet. The assembly is also done quickly.
To store the tent in its cover, simply fold the tent on itself until it reaches approximately the width of the cover, fold the poles in bundles and place them on the room or the flysheet, then roll the whole up compactly to slip them into the cover.
IMPERM ABILIT
Forclaz tents are validated in the laboratory: pitched tent, 200 liters / meter / hour (4 hours, the equivalent of tropical rain). They are also tested by a panel of users in the field.
20 denier polyester flysheet (PES) and 40D polyamide (PA) floor mats are in coated polyurethane (inside) and silicone (outside).
Taped seams with iron-on strips.
Multi-component chamber combining breathability, wind protection and limitation of condensation
WIND RESISTANCE
We test all our tents in a wind tunnel, in a wind tunnel on a turntable, to expose each side of the tent to the wind.
In order to guarantee its resistance to wind, the tent must be well pitched, stretched without excess, with all the shrouds well deployed around the tent. Thus it will remain habitable with a wind speed of 70 km / h near the ground.
Our tents are certified by the independent laboratory during CSTB Nantes.
VENTILATION AND LIMITATION OF CONDENSATION
Room in mosquito net for ventilation and in water-repellent fabric to protect from condensation and drafts. There is great ventilation at the front of the tent, as well as ventilation at the feet.
In order to limit condensation inside the tent, it must be properly pitched, canvas stretched, without excess. The use of ventilation and good air circulation limits the humidity inside.
SEASONS
3 season tent: your tent will protect you from the difficult weather conditions that you would encounter in spring, summer or fall. It will support small snowfall but is not designed to withstand large loads that could be on the structure.
In the event of snow, think about regularly shaking your tent in order to make the accumulation of snow fall on the ground and to avoid putting too much weight on the structure of your tent.
ECO TENT DESIGN
The arch is colored thanks to an innovative anodization which eliminates the use of nitric and phosphoric acids.
Your sardines can have a "raw" or "used" appearance but they retain all their technical characteristics and resistance; they are non-colored because not anodized (no use of acid which only has an aesthetic interest).
These actions help limit the environmental impact of your product.
R PERFORMANCE AND AFTER-SALES
As designers and practitioners who love our playground, we care about the durability of our products, which is why all our tents are designed to be repairable.
You will find the pieces of tach es (arches, room, ...) in the department or the workshop of your Decathlon store, on decathlon.fr or the address support.decathlon.fr
In the event of a problem, do not hesitate to have your tent examined at your Decathlon store.
Repair kit (ferrule, patch): 20 g
2 years warranty. All our tents are repairable. Parts and information in store or on decathlon.fr
WEIGHT: 2.3 kg
Total weight
COMPOSITION: Inner fabric: 80.0% Polyamide, Inner fabric: 20.0% Thermoplastic polyurethane Main fabric: 80.0% Polyester, Main fabric: 20.0% Thermoplastic polyurethane Bow: 100.0% Aluminum
MORE INFORMATION