ONEUP Switch Cinch Race Face Spider

Name: ONEUP Switch Cinch Race Face Spider
Brand: OneUp
SKU: 344750

Be the first to write a review

€29.99

RRP €34.99 ⁽¹⁵⁾

premium plus icon €0.60in your cashback

IN STOCK, dispatch today

Order in the next 06h28min for dispatch today ⁽⁶⁾

Last one in stock!

€29.99

Sold by Alltricks

Become Premium !

€0.60 cashback for the purchase of this product

For only 9.99€, enjoy 1 year of benefits:

Unlimited free 24-hour express delivery

Cashback discounts on thousands of products

100 days returns policy

Exclusive benefits

More about Alltricks Premium

The Premium subscription is not automatically renewed, no payment is required at the end of the 1 year period.

Description

Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler.

Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring
Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding
Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain
Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire

Quick Change

Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank. Simply loosen the bolts 2 turns, unlock the ring by rotating it by 20 degrees and pull it over and off your crank. Reverse these steps to install your new ring. If you plan to ride a trail that you know is steeper than your local trails, you can switch to a smaller ring in the parking lot, in less time than it takes your friend to put on his riding shoes!

Features :

Material: 7075-T6
Chainline: Regular (49mm)
Compatible Race Face Cinch (Next SL G4 / Next R / Next SL / Sixc / Turbine / Atlas / Aeffect)

Installation: Align the small bump on the edge of the carrier with your crank arm. Install ring onto carrier and tighten bolts to 8Nm. All 4 bolts need to be backed off / tightened to Switch rings (anti-clockwise is tightening from the outside / on bike position). Use some grease on the Switch bolts and tightening with a wrench FULLY ENGAGED in the bolt.